In depth explanation of the principle of gearbox and reducer

In depth explanation of the principle of gearbox and reducer

2024-10-16

In the field of mechanical transmission, gearboxes and reducers play a crucial role. It can reduce speed and increase torque, enabling mechanical equipment to operate efficiently and stably under different working conditions. This article will provide readers with valuable practical knowledge by delving into the principles of gearboxes and reducers.

MORE
The difference between hard tooth surface reducer and cycloidal pin reducer

The difference between hard tooth surface reducer and cycloidal pin reducer

2024-10-15

In summary, there are significant differences between hard tooth surface reducers and cycloidal pin reducers in terms of appearance, structure, and characteristics. When using, suitable reducers should be selected according to actual needs and usage conditions to ensure transmission efficiency and stability.

MORE
【 Science Popularization 】 Analysis of Advantages and Shortcomings of Worm Gear Reducer

【 Science Popularization 】 Analysis of Advantages and Shortcomings of Worm Gear Reducer

2024-10-15

Worm gear reducer is a common mechanical transmission device composed of worm gear and worm gear. Its working principle is to drive the worm wheel to rotate through the rotation of the worm, achieving the purpose of deceleration and increasing torque.

MORE
The advantages and challenges of permanent magnet DC motors in modern motor technology

The advantages and challenges of permanent magnet DC motors in modern motor technology

2024-10-14

Due to the complex structure of permanent magnet DC motors, fault diagnosis and maintenance are difficult and require professional personnel for maintenance.

MORE
Which planetary gear reducer is more suitable for industrial applications?

Which planetary gear reducer is more suitable for industrial applications?

2024-10-14

When choosing a planetary gear reducer, consumers need to choose the appropriate model based on their actual needs. For example, in situations where high precision is required, the SG series can be chosen; For heavy-duty situations, the K series can be chosen; For situations with limited space, the R series can be chosen; For harsh environments, the F series can be chosen.

MORE
Precautions for using worm gear reducer

Precautions for using worm gear reducer

2024-10-12

1. The thin casing of the gearbox can easily cause product breakage, leading to oil leakage, insufficient lubrication, poor heat dissipation, and affecting the operation of the gearbox. 2. The above problems can also occur when sand holes appear on the casing of the reducer, but it is relatively slow. 3. The primer of the gearbox housing must be done very well to prevent rusting and oil leakage. The most important thing is to pay attention to the appearance of the primer housing. 4. The gearbox housing should not be struck with a heavy hammer, let alone dropped heavily. Monitoring of oil level in worm gear reducer: 1. Cut off the power supply to prevent electric shock. Wait for the gearbox to cool down. 2. Remove the oil level plug and check if the oil is full. 3. Install the oil level plug. 4. Open the drain plug and take an oil sample. 5. Check the viscosity index of the oil. 6. If the oil is visibly cloudy, it is recommended to replace it as soon as possible.

MORE
< 1...575859...70 >
GUANGDONG YONGKUN MOTOR CO.,LTD

Address: No.66 bis, Hetong Road, Dongfeng Town, Zhongshan City, Guangdong Province

Tel：0760-22189558
Mobile：13923325827

 

ABOUT US

Profile
Honors
Factory
Culture

PRODUCTS

NMRV reducer
Gearmotor
Precision Planetary Reducer
Four series of hard tooth surface
Micro speed control motor
Right angle gear motor

NEWS

Company News
Industry Consultation

FOLLOW US

FOLLOW US

©2023 GUANGDONG YONGKUN MOTOR CO.,LTD All rights reserved

粤ICP备2023035678号

Business license

Powered by:www.300.cn  Zhongshan

SEO