Precautions for using worm gear reducer
Release Time ：
2024-10-12
Source ：
network
Author：
Made by Guangdong Yongkun Motor Co., Ltd
The casing of the worm gear reducer is an important indicator related to the appearance and product quality of the reducer:
1. The thin casing of the gearbox can easily cause product breakage, leading to oil leakage, insufficient lubrication, poor heat dissipation, and affecting the operation of the gearbox.
2. The above problems can also occur when sand holes appear on the casing of the reducer, but it is relatively slow.
3. The primer of the gearbox housing must be done very well to prevent rusting and oil leakage. The most important thing is to pay attention to the appearance of the primer housing.
4. The gearbox housing should not be struck with a heavy hammer, let alone dropped heavily.
Monitoring of oil level in worm gear reducer:
1. Cut off the power supply to prevent electric shock. Wait for the gearbox to cool down.
2. Remove the oil level plug and check if the oil is full.
3. Install the oil level plug.
4. Open the drain plug and take an oil sample.
5. Check the viscosity index of the oil.
6. If the oil is visibly cloudy, it is recommended to replace it as soon as possible.
NMRV,Worm gear reducer,Gear motor
Address: No.66 bis, Hetong Road, Dongfeng Town, Zhongshan City, Guangdong Province
Tel：0760-22189558
Mobile：13923325827
©2023 GUANGDONG YONGKUN MOTOR CO.,LTD All rights reserved
