Construction and structural diagram of hard tooth surface reducer

Construction and structural diagram of hard tooth surface reducer

2024-10-12

Compared with traditional reducers, hard tooth surface reducers have significant advantages and are suitable for various mechanical systems. Below, we will introduce the structure and diagram of hard tooth surface reducers. Hard tooth surface reducers have strong load-bearing capacity and are more durable after hardening.

MORE
Unveiling the Turbo Worm Gear Reducer

Unveiling the Turbo Worm Gear Reducer

2024-10-11

Turboworm gear reducers are widely used in various industries such as industrial automation, construction engineering, environmental protection equipment, new energy, as well as shipbuilding and marine engineering, due to their high reduction ratio, smooth transmission, and strong load-bearing capacity. Through a deep understanding of the composition, characteristics, usage scenarios, and application industries of worm gear reducers, we believe you have gained a comprehensive understanding of their charm. In the future development, worm gear reducers will continue to leverage their advantages in the transmission field and help promote the prosperity and development of various industries!

MORE
Drying method for EX explosion-proof motor after moisture exposure

Drying method for EX explosion-proof motor after moisture exposure

2024-10-11

Pull out the motor rotor and feed the three-phase low-voltage AC power into the three-phase winding. The voltage value should be 7% to 15% of the rated voltage of the winding, and the current should not exceed 50% to 70% of the rated current of the winding. To avoid excessive current, an ammeter should be connected in series in the three-phase circuit. If the current is too high, the voltage should be lowered in time before drying. It is recommended to use an induction transformer for voltage regulation.

MORE
Basic knowledge of motor windings: pole spacing, pitch, winding coefficient

Basic knowledge of motor windings: pole spacing, pitch, winding coefficient

2024-10-10

The winding inside the motor is composed of coils of various sizes and shapes. Due to the fact that each coil has two component edges embedded in the iron core slot, it means that each coil needs to be embedded in two slots. In a single-layer winding, only one coil element edge is embedded in each slot, so the number of bus coils is only equal to half of the total number of slots; In a double-layer winding, two coil elements are embedded in the upper and lower layers of each slot, so the total number of coils is equal to the number of iron core slots.

MORE
45 motor knowledge, complete this time!

45 motor knowledge, complete this time!

2024-10-10

When transformers are operated in parallel, the principle of load distribution is that the per unit value of the transformer load current is inversely proportional to the per unit value of the short-circuit impedance. The condition for fully utilizing the capacity of transformers during parallel operation is that the per unit value of short-circuit impedance must be equal, and their impedance angles must also be equal.

MORE
What is the difference between 220V and 380V reduction motors?

What is the difference between 220V and 380V reduction motors?

2024-10-09

There are certain differences between 220V and 380V reduction motors in terms of voltage definition, application scenarios, performance characteristics, usage costs, and safety. When choosing a deceleration motor, comprehensive consideration should be given to the actual needs and application scenarios to select the most suitable voltage level. At the same time, safety regulations should be strictly followed during use to ensure the safety of personnel and equipment. Through reasonable selection and use, the reduction motor will provide stable and efficient power support for modern industrial production.

MORE
< 1...585960...70 >
GUANGDONG YONGKUN MOTOR CO.,LTD

Address: No.66 bis, Hetong Road, Dongfeng Town, Zhongshan City, Guangdong Province

Tel：0760-22189558
Mobile：13923325827

 

ABOUT US

Profile
Honors
Factory
Culture

PRODUCTS

NMRV reducer
Gearmotor
Precision Planetary Reducer
Four series of hard tooth surface
Micro speed control motor
Right angle gear motor

NEWS

Company News
Industry Consultation

FOLLOW US

FOLLOW US

©2023 GUANGDONG YONGKUN MOTOR CO.,LTD All rights reserved

粤ICP备2023035678号

Business license

Powered by:www.300.cn  Zhongshan

SEO