The worm gear reducer is the use of gear speed converter can decelerate the motor rotation number to the desired rotation number, but in the use of the mechanical cleaning and maintenance must pay attention to the following matters.

     Note one: in the worm gear reducer after 200-300 hours of operation, it is necessary to carry out an oil change; and after the first oil change in the use of machinery should be regularly to check the quality of oil mixed with impurities or degraded oil must be replaced in a timely manner. The worm gear reducer plays the role of matching speed and transmitting torque between the prime mover and the working machine or actuator, and is a relatively precise machine. The purpose of using it is to reduce the speed and increase the torque. It comes in a wide variety of types and models, and different types have different uses. According to the transmission type, it can be divided into gear reducer, worm gear reducer and planetary gear reducer; according to the different transmission stages, it can be divided into single-stage and multi-stage reducer; according to the shape of the gear, it can be divided into cylindrical gear reducer, bevel gear reducer and bevel-cylindrical gear reducer; according to the arrangement form of transmission, it can be divided into unfolded, shunt type and coaxial type reducer.

     Attention matters two: when the machinery from the new operation must be replaced with new oil, the new oil must be replaced with the original brand, the same brand and viscosity of different oil is also allowed to mix the use of.

     Note three: in the worm gear reducer work invented oil temperature more than eighty degrees Celsius or oil pool temperature of more than one hundred degrees Celsius and produce abnormal noise when you need to end the mechanical use, and must immediately check the cause only after the fault eliminated to continue to run.

     In addition to the worm gear reducer grease choice to be able to choose based on walking reducer bearing load, some heavy load should be selected needle into the small grease; and in high temperature mechanical work in addition to the needle into the degree must be small, but also to adhere to the high oil film strength and extreme pressure function; especially for some calcium-based grease words because it is not easy to dissolve in water, only suitable for dry and less water environment Especially for some calcium-based grease, it can only be used in dry and less watery environment. The worm gear reducer is designed and manufactured on the basis of the modular combination system, with a great number of motor combinations, installation forms and structural solutions, and the transmission ratio is finely graded to meet different working conditions and achieve electromechanical integration. RZS electric furnace reducer is an independent component consisting of gear drive, worm drive and gear-worm drive enclosed in a rigid housing, which is often used as a reducer between the prime mover and the working machine. It plays the role of matching speed and transmitting torque between the prime mover and the working machine or actuator, and is widely used in modern machinery.