Introduction to Reduction Motors

① Space saving, reliable and durable;

② High ability to withstand overload;

③ Low energy consumption and superior performance;

④ Low vibration, low noise, and high energy efficiency;

Classification of Reduction Motors

There are many types of reducers, which can be divided into gear reducers, worm gear reducers, and planetary gear reducers according to the transmission type; According to the different transmission stages, it can be divided into single-stage and multi-stage reducers.

Application of Reduction Motor in Stereoscopic Garage

With the increasing popularity of cars entering households. Difficulty in parking has increasingly become a social problem. However, increasing the number of multi-level parking spaces requires the construction of a large number of multi-level parking garages, and people will become increasingly dependent on them.

Because it is a three-dimensional garage, the height may be relatively high during use, and lifting the car up at different heights requires a power source, which is mostly provided by gear reduction motors.

But in this process, a single gear reducer motor is not enough. It needs to be paired with a gear reducer or worm gear reducer to have enough power to lift something that weighs several tons of power. So, which type of gearbox and gear motor combination should be used to form the transmission for this device?

The operation modes of different three-dimensional garages are different, some are inclined upwards, some are upward, and different operation modes may require different power, so it is necessary to see what kind of operation mode is required in the actual process.

Currently, about 70% of the three-dimensional garages on the market are lift and horizontal moving three-dimensional garages. However, the motor of the stereo garage is the core part of the transmission mechanism of this type of stereo garage. The three-dimensional garage motor is divided into lifting motor and lateral movement motor. The quality of a motor directly affects the usability of a three-dimensional garage.

How to judge the quality of a stereo garage motor?

Firstly, observe whether there are any sparks or abnormal smoke during the operation of the motor in the three-dimensional garage.

Secondly, listen and monitor for any noise or unusual sounds during the operation of the stereo garage motor. If there is abnormal noise, it may be a potential fault factor.

Again, "smell" by smelling the electric motor in the three-dimensional garage to determine if there is a strong burnt or burnt smell. If a burnt smell is found, it indicates that the internal temperature of the motor is too high.

Finally, "cut" by touching the outer shell of the motor and the surrounding parts of the bearings in the three-dimensional garage to check for any temperature abnormalities. If the temperature around the bearing is too high, it may be a potential factor for the malfunction of the stereo garage motor.