1、 Introduction

Reducer motor is a common component in mechanical equipment, widely used in various industrial fields. The nameplate of the deceleration motor is an important identification of the deceleration motor, which records various parameters and information of the deceleration motor. This article will take you to uncover the secret of the nameplate of the gearbox motor, allowing you to understand and master the information and usage methods of the gearbox motor nameplate!

2、 Composition of nameplate for deceleration motor

1. Model of deceleration motor: The model of deceleration motor is usually composed of numbers and letters, representing various parameters and performance indicators of the deceleration motor. For example, the model may include information such as motor type, input/output speed, power, torque, etc.

2. Reduction ratio: Reduction ratio is an important parameter of a reduction motor, indicating the degree of deceleration of the motor. The reduction ratio is usually represented by "i" and the unit is "times". For example, i=30 means that the output speed of the deceleration motor is 1/30 of the input speed.

3. Rated power: Rated power is the maximum power that the deceleration motor can operate continuously for a long time under specified conditions. The rated power is usually represented by the letter "P" and is measured in "kW" or "horsepower".

4. Rated torque: Rated torque refers to the maximum torque continuously output by a deceleration motor under specified conditions. The rated torque is usually represented by the letter "T" and the unit is "N · m.

5. Input speed: Input speed refers to the speed of the input shaft of the deceleration motor, that is, the speed of the motor. The input speed is usually represented by the letter "n1" and the unit is "r/min.

6. Output speed: Output speed refers to the speed of the output shaft of the deceleration motor. The output speed is usually represented by the letter "n2" and the unit is "r/min.

7. Protection level: Protection level refers to the protective ability of the casing of the deceleration motor, indicating the environment in which the motor can operate. The protection level is usually represented by the letter "IP" followed by a number, with higher numbers indicating stronger protection capabilities.

8. Operating environment temperature: Operating environment temperature refers to the temperature range within which the deceleration motor operates under specified conditions. The ambient temperature is usually represented by the letter '℃'.

9. Other information: In addition to the above information, the nameplate of the deceleration motor may also include the manufacturer's name, production date, quality assurance, and other information.

3、 How to use the nameplate of the deceleration motor

1. Choose the appropriate reduction motor model based on the required reduction ratio. Based on the specific requirements of the mechanical equipment, determine the required output speed and torque, and then select the deceleration motor model with corresponding parameters.

2. Choose the appropriate rated power and rated torque based on the load situation of the mechanical equipment. If mechanical equipment needs to withstand large loads, it is necessary to choose a reduction motor with a higher rated power and torque.

3. Choose the appropriate input speed based on the power supply and voltage of the mechanical equipment. If the power and voltage of the mechanical equipment are unstable, it is necessary to choose a deceleration motor with a larger input speed to ensure the stable operation of the motor.

4. Choose the appropriate protection level and operating temperature range based on the operating environment of the mechanical equipment. If mechanical equipment needs to operate in harsh environments, it is necessary to choose a reduction motor with a higher protection level and a temperature range for use.

5. Understanding and mastery of other information: Carefully read the other information on the nameplate of the deceleration motor, understand the manufacturer's name, production date, quality assurance, etc., in order to obtain better protection and maintenance during the purchase and use process.