Steps for correctly installing and maintaining planetary gear reduction motors

Steps for correctly installing and maintaining planetary gear reduction motors

2025-08-01

The correct installation and maintenance of planetary gear reduction motors are key to their normal operation. Therefore, when installing the planetary gear reduction motor, please be sure to carefully install it in the following order.

MORE
Installation method of small reduction motor

Installation method of small reduction motor

2025-08-01

The characteristics of small reduction motors are efficiency and reliability, long working life, easy maintenance, and application. Its series can be divided into single-stage, two-stage, and three-stage gear reduction motors, and the installation and layout methods mainly include expansion type, coaxial type, and split type. 1. In the expansion type of two-stage cylindrical reduction motor, the gears are asymmetric relative to the support position. When the shaft undergoes bending and twisting deformation, the load is divided by the tooth width

MORE
What is the full load efficiency of the gearbox?

What is the full load efficiency of the gearbox?

2025-07-31

The "full load efficiency" of a gearbox refers to the ratio of the output mechanical power to the input mechanical power when the gearbox is subjected to the maximum design load (i.e. rated load or full load) at the rated input speed, usually expressed as a percentage (%).

MORE
The reason for the smoking phenomenon of the deceleration motor

The reason for the smoking phenomenon of the deceleration motor

2025-07-31

The smoking phenomenon of the deceleration motor is a very serious fault signal, indicating that a very high temperature has been generated inside the motor, causing insulation materials or other components to start burning or decomposing. This is usually the result of a combination of multiple factors, and it is necessary to immediately shut down and cut off the power for thorough inspection and maintenance, otherwise it may cause the motor to be completely scrapped or even cause a fire.

MORE
Practical skills and methods for solving the problem of low efficiency of gearbox motors

Practical skills and methods for solving the problem of low efficiency of gearbox motors

2025-07-29

The motor in the reducer, as the core power source of industrial production, often experiences frequent failures or efficiency decreases due to "overload" operation, that is, the motor in the reducer is overloaded. This will weaken the motor efficiency in the gearbox, shorten its service life, and even cause production interruptions.

MORE
What factors determine the output force of a gear reduction motor?

What factors determine the output force of a gear reduction motor?

2025-07-29

Gear reduction motor is a common power transmission device that transmits power through gears, converting the high-speed rotation of the motor into low-speed high torque output. The output force of a gear reduction motor is influenced by multiple factors, including the gear transmission ratio, input power, material selection, and lubrication conditions. The following will provide a detailed introduction to the impact of these factors on the output force of gear reduction motors.

MORE
< 1234...70 >
GUANGDONG YONGKUN MOTOR CO.,LTD

Address: No.66 bis, Hetong Road, Dongfeng Town, Zhongshan City, Guangdong Province

Tel：0760-22189558
Mobile：13923325827

 

ABOUT US

Profile
Honors
Factory
Culture

PRODUCTS

NMRV reducer
Gearmotor
Precision Planetary Reducer
Four series of hard tooth surface
Micro speed control motor
Right angle gear motor

NEWS

Company News
Industry Consultation

FOLLOW US

FOLLOW US

©2023 GUANGDONG YONGKUN MOTOR CO.,LTD All rights reserved

粤ICP备2023035678号

Business license

Powered by:www.300.cn  Zhongshan

SEO